MicroCyb ShowSpark Wi-Fi Module: Wireless Upgrade for the ShowSpark Main Board

Cut the cable. Swap in Wi-Fi and run your show from anywhere you have a signal.

Requires a ShowSpark main board (sold separately). The ShowSpark Wi-Fi Module plugs into the ShowSpark main board in place of the Ethernet module. You get the same 8 pixel outputs and the same easy web setup, with no network cable to run. Already have a ShowSpark? Swap out the Ethernet module for this one and your controller goes wireless.

With the Wi-Fi module fitted, your ShowSpark drives up to 6,400 smart pixels over your home Wi-Fi. Stream your show live from xLights, or load your sequences and music onto the SD card and let it run the show by itself on a schedule. Everything is set up from a web page on your phone, tablet or computer.

Why you’ll love it

A simple module swap. Plug the Wi-Fi module into the main board in place of the Ethernet module. Your pixel wiring stays on the main board.
Wireless setup in minutes. Join the ShowSpark’s setup network from your phone and the setup page opens by itself. Pick your home Wi-Fi, and you’re done.
Runs the show on its own. Sequences and music play straight from the SD card, with playlists and a scheduler. The clock and time zone set themselves, so your show starts on time every night with no PC needed.
Music on a Bluetooth speaker. Pair a Bluetooth speaker and the show’s music plays in step with the lights.
Made for xLights. xLights sees the ShowSpark as an FPP controller. Upload sequences and music with FPP Connect, set up all 8 ports from xLights in one step, and check your layout on the built-in Visualiser.
Live streaming too. It takes DDP, E1.31 (sACN), Art-Net and Glediator, and it can follow an FPP player’s MultiSync to play along with a bigger show.
35 built-in effects. Light up your display straight away with effects like Candy Cane, Snowfall, Icicle Drip, Halloween Eyes and more. No sequencing needed.
See what it’s doing at a glance. The optional OLED status display shows the setup Wi-Fi name and password, the controller’s address, what’s playing, and pixel test mode.
Easy to keep up to date. Firmware updates install over the network with one button, and your settings are kept. Back up your whole setup to a file and restore it at any time.

Specifications (with the ShowSpark main board)

Module type Plug-in Wi-Fi module, replaces the Ethernet module
Requires ShowSpark main board (sold separately)
Pixel outputs 8 ports, up to 800 pixels each (6,400 total)
Pixel types WS2811 / WS2812B-style, RGB and RGBW
Connectivity Wi-Fi (joins your router, or its own setup network)
Live protocols DDP, E1.31 / sACN, Art-Net, Glediator
Standalone playback FSEQ sequences + MP3 music from SD card, playlists, scheduler
Audio Bluetooth speaker output
Software xLights (FPP Connect, controller upload), FPP MultiSync
Setup Web page in any browser (phone friendly), no app
Display Optional 0.91" OLED status screen
Power 5 V or 12 V DC from your own power supply; USB-C powers the controller and a few pixels for bench testing

Main board, power supply, pixels and SD card are not included. 24 V setups are for advanced users only.